Basic Info.
Blade Material
Hard Alloy Steel
Blade Addendum Width
Less Than 0.05mm
Blade Angle
30 Degree +/- 1 Degree
Multi-Cutting Blades Spacing
1mm/2mm/3mm
The Number of Square
25 Squares/100 Squares
The Blade Tip Diameter
<0.03mm/ <0.06mm
Suitable for
Lab and All Kinds of Working Site
Transport Package
Carton Box
Product Description
Single Blade Cross-cut Adhesion Testing
Cross Cut Adhesion Tester for Paint Industry.
Cross Hatch Cutter Adhesion Tester
Description:
Cross cut adhesion tester conforms to GB/T 9286, ISO2409, ASTM D 3002 and ASTM D 3359 design standard. For uniformly marking out a certain size of the lattice, through the evaluation of the coating complete degree to assess coating substrate adhesion degree, expressed as a "level". It is mainly used for the determination of organic coating cross cut test for adhesion, not only suitable for laboratory, also can be applied to various conditions of the construction site.
Cutter bit is made of hard alloy steel. Blade size is strictly controlled within the requirements of the standard deviation: Blade addendum width is less than 0.05mm; blade angle of 30 ° ± 1 °. Head of blade design not onlymaintaining the cutter sharpness, but reduced the number of frequent replacement.
Each set of cross-cut device which we are equipped with one piece of 600# 3M tape, and a brush, a magnifying glass and a plastic carrying case.
1. 1mm blade spacing multi-blade cutting knife is suitable for film thickness <60 um hard substrate specimens (Metal)
2. 2mm blade spacing multi-blade cutting knife is suitable for film thickness 60~120um soft substrate specimens (wood/ plastic)
3. 3mm blade spacing multi-blade cutting knife is suitable for film thickness 121~250 um hard substrate specimens or soft substrate specimens.
1. Single working side blades: flexible cutting tool carrier, especially suitable for the substrate is not flat.
2. Multi-cutting blades spacing: 1mm/2mm/3mm
3. The number of square: 25 squares/100 squares
4. The blade tip diameter: <0.03mm/ <0.06mm
5. Standard configuration: one cross cut tester;a roll of 3M (600 type) adhesive tape; a writing brush made of wolf's hair; a magnifying glass; a carrying case.
Single side cross cut adhesion tester ordering information:
504/2 | cross cut adhesion tester (1mm/100squares) |
504/3 | cross cut adhesion tester (1mm/25squares) |
504/4 | cross cut adhesion tester (2mm/100 squares) |
504/5 | cross cut adhesion tester (2mm/25squares) |
504/6 | cross cut adhesion tester (3mm/25squares) |
Six working side blades Cutter Ordering information:
502/1 | Suit type cross cut adhesion tester (contains one tool bit) |
502/2 | cross cut adhesion tester (1mm/100squares) |
502/3 | cross cut adhesion tester (1mm/25 squares) |
502/4 | cross cut adhesion tester (2mm/100 squares) |
502/5 | cross cut adhesion tester (2mm/25 squares) |
502/6 | cross cut adhesion tester (3mm/25 squares) |
Welcome to Contact with Us:
Ms Sophia Lee |
Shantou Glorythai Packing Equipment Co.,Ltd |
TEL:86-754-88733293 FAX:86-754-88782162 Mob:86-13729200269 S ky pe:wingtaisophia Q Q:1228381719 We chat/ What sapp:86-13592875823 |
http://glorythaipacking.en.made-in-china.com http://glorythaipacking.en.made-in-china.com/ |
Address:
Room 703, 7 Floor, Block a, Huangshan Building, Longhu District, Shantou, Guangdong, China
Business Type:
Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9001
Company Introduction:
Wingtai Development Enterprise was established in 2002. Wingtai always captures the market demands quickly, based on rich experiences in packaging industry and R&D technology as the core, to extensive our worldwide business on packaging, printing machinery, testing equipment, eliminating static electricity and electronic industry.
In 2002, established "Wingtai Development Enterprise"
In 2008, set up "Shantou Wingtai Packing Equipment Co., Ltd. "
In 2011, found "Wingtai Packaging Equipment Technology (HK) Limited"
Wingtai Development Enterprise is specialized in packaging equipment, printing machinery, instrument′s R & D, producing and sale. In 2002, at the beginning, imported merchandise are our main products. Since 2008, "Shantou Wingtai Packing Equipment Co., Ltd. "has been found, we re-positioned our commercial business. From import to domestic production, from domestic market to global market. In this turning point, based on our rich experiences in packaging industry and R&D technology, we are success in commercial adjustment. Wingtai′s performance growth range is over 20% every year. Until December 2015, on one hand, in the domestic market, we have been established cooperation relations with over 2000 manufacturers and distributors, on the other hand, in the overseas market, we have been developed long-term and stable business relations with over 380 clients from 95 countries. Therefore, Wingtai becomes a developer and leader in this line.
Not only self development, we also participate in the development of district chamber of commerce and consortium. Wingtai has joined the "Chaoshan Net Chamber of Commerce", "Eastern Guangdong Import and Export Chamber of Commerce" and become the member of council. Wingtai holds the cultural concept--"Integrity, Share, Innovation, Responsibility ", and the sense of mission--" Joint development to create a better future". Wingtai has a good cooperation with other chamber of commerce members, to make a contribution to packaging industry in China, even the world.
Our primary goal: To help our cooperative enterprises produce the most perfect products!
Our purpose: To provide more satisfactory products and services for all clients and wish to cooperate with all customers while increasing the maximum benefit of customers!